KHEMKA BROACH & SPLINE GAUGE

Complete Spline Toolings under one roof

Request a quote for Broaches

To save time, insure accuracy.Fill-in and submit this form - we'll respond shortly.

           Name: 
    Designation: 
   Company Name: 
 Street Address: 
 Address-line 2: 
      Town/City:   State:  Zip: 
          Phone:          FAX: 
          EMail:

1. Description of Cut - 
   Size & Shape: 
   i.e. Square, Hex, Round, Keyway, D-Hole, DD-Hole, Serration, Rectangular, V-notch, Etc.
      Tolerance: 
2. Length of Cut: 
3. Type of Material to be Broached: 
4. Condition of Hole or Surface before Broaching - 
   Size & Shape of Pilot Hole: 
   If hole is cast, give minimum hole size, including draft and
         fillet radii, if any: 
5. For Keyway Broaches give - 
   Min. Bore Size:       Keyway width: 
        Tolerance: 
   Depth of Keyway, measured across Bore: 
6. Type of Broaching Machine used: 
   Push   Pull   Tonnage:    Ram Travel: 
   Daylight Opening:

In addition, a fully dimensioned drawing of the finished part, casting, forging, or Broach would be most helpful. You may FAX us at (91) 240-2485517.

For any sort of discussions contact Mr. P.K. Khemka at (91) 240-484712 (DayTime-India) and at (91) 240-488502 (EveningTime-India).

© Copyright 2006 by Khemka Broach & Spline Gauge
H-5/39 MIDC Chikalthana,Aurangabad,Maharashtra,India 431210
(91) 240-2484712
sales@khemkabroach.com